Plurk paste

#include <TFT_eSPI.h>
#include <Button2.h>
#include <WiFi.h>
#include <HTTPClient.h>
#include <ArduinoJson.h>
#include <AHT20.h>
#include <Wire.h>
#include <time.h>

// WiFi 設定 (請修改為你的網路)
const char* ssid = "YOUR_WIFI_SSID";
const char* password = "YOUR_WIFI_PASSWORD";

// OpenWeatherMap API 設定
const char* weatherApiKey = "YOUR_API_KEY"; // 請至 openweathermap.org 申請
const char* city = "Hsinchu,TW";

// 硬體腳位定義
#define MQ2_PIN 34 // 煙霧感測器
#define MQ135_PIN 36 // 空氣品質感測器
#define SDA_PIN 21 // AHT20 SDA
#define SCL_PIN 22 // AHT20 SCL

// RGB LED 設定
#define RED_PIN 15
#define GREEN_PIN 2
#define BLUE_PIN 13
#define PWM_FREQ 5000
#define PWM_RES 8
#define RED_CH 0
#define GREEN_CH 1
#define BLUE_CH 2

// 按鍵設定
#define BUTTON_A_PIN 0
#define BUTTON_B_PIN 35

// 全域物件
TFT_eSPI tft = TFT_eSPI();
Button2 buttonA = Button2(BUTTON_A_PIN);
Button2 buttonB = Button2(BUTTON_B_PIN);
AHT20 aht20;

// 顯示頁面枚舉
enum DisplayPage {
PAGE_OVERVIEW = 0, // 總覽頁面
PAGE_AIR_DETAIL, // 空氣品質詳細
PAGE_CLIMATE, // 溫濕度詳細
PAGE_WEATHER, // 時間天氣
PAGE_SYSTEM, // 系統狀態
PAGE_COUNT // 總頁數
};

// 全域變數
DisplayPage currentPage = PAGE_OVERVIEW;
unsigned long lastSensorUpdate = 0;
unsigned long lastWeatherUpdate = 0;
unsigned long lastTimeSync = 0;
const unsigned long sensorInterval = 2000; // 感測器更新間隔
const unsigned long weatherInterval = 600000; // 天氣更新間隔 (10分鐘)
const unsigned long timeSyncInterval = 3600000; // 時間同步間隔 (1小時)

// 感測器數據
struct SensorData {
float temperature = 0.0;
float humidity = 0.0;
int mq2_raw = 0;
int mq135_raw = 0;
float mq2_ppm = 0.0;
float mq135_ppm = 0.0;
int airQualityIndex = 0;
String airQualityLevel = "良好";
} sensorData;

// 天氣數據
struct WeatherData {
String description = "載入中...";
float temp = 0.0;
int humidity = 0;
float pressure = 0.0;
float windSpeed = 0.0;
String icon = "01d";
bool valid = false;
} weatherData;

// WiFi 和系統狀態
bool wifiConnected = false;
bool ntpSynced = false;
String currentTime = "00:00:00";
String currentDate = "2025-01-01";

void setup() {
Serial.begin(115200);
Serial.println("=== 智慧空氣品質監控系統啟動 ===");

// 初始化硬體
initDisplay();
initRGBLED();
initSensors();
initButtons();

// 顯示啟動畫面
showBootScreen();

// 連接 WiFi
connectWiFi();

// 同步時間
syncNTPTime();

// 獲取初始天氣
updateWeather();

Serial.println("系統初始化完成");
}

void loop() {
// 處理按鍵
buttonA.loop();
buttonB.loop();

// 更新感測器數據
if (millis() - lastSensorUpdate >= sensorInterval) {
updateSensorData();
updateDisplay();
updateLEDAlert();
lastSensorUpdate = millis();
}

// 更新天氣資訊
if (millis() - lastWeatherUpdate >= weatherInterval && wifiConnected) {
updateWeather();
lastWeatherUpdate = millis();
}

// 定期同步時間
if (millis() - lastTimeSync >= timeSyncInterval && wifiConnected) {
syncNTPTime();
lastTimeSync = millis();
}

// 更新時間顯示
updateTimeDisplay();

delay(100);
}

void initDisplay() {
tft.begin();
tft.setRotation(1);
tft.fillScreen(TFT_BLACK);
Serial.println("TFT 螢幕初始化完成");
}

void initRGBLED() {
ledcSetup(RED_CH, PWM_FREQ, PWM_RES);
ledcSetup(GREEN_CH, PWM_FREQ, PWM_RES);
ledcSetup(BLUE_CH, PWM_FREQ, PWM_RES);

ledcAttachPin(RED_PIN, RED_CH);
ledcAttachPin(GREEN_PIN, GREEN_CH);
ledcAttachPin(BLUE_PIN, BLUE_CH);

setRGBColor(0, 0, 255); // 開機藍色
Serial.println("RGB LED 初始化完成");
}

void initSensors() {
Wire.begin(SDA_PIN, SCL_PIN);

if (aht20.begin()) {
Serial.println("AHT20 初始化成功");
} else {
Serial.println("AHT20 初始化失敗");
}

// 氣體感測器預熱
Serial.println("氣體感測器預熱中...");
delay(2000);
Serial.println("感測器初始化完成");
}

void initButtons() {
buttonA.setPressedHandler([](Button2& btn) {
currentPage = (DisplayPage)((currentPage + 1) % PAGE_COUNT);
updateDisplay();
buttonFeedback();
Serial.printf("切換到頁面 %d\n", currentPage);
});

buttonB.setPressedHandler([](Button2& btn) {
// 強制更新所有數據
updateSensorData();
if (wifiConnected) {
updateWeather();
syncNTPTime();
}
updateDisplay();
buttonFeedback();
Serial.println("手動更新完成");
});

Serial.println("按鍵初始化完成");
}

void showBootScreen() {
tft.fillScreen(TFT_BLACK);

// 標題
tft.setTextColor(TFT_CYAN);
tft.setTextSize(2);
tft.setCursor(20, 10);
tft.println("智慧空氣監控");

// 圖標區域 (簡單的空氣品質圖標)
drawAirQualityIcon(90, 35, TFT_GREEN);

// 功能列表
tft.setTextColor(TFT_YELLOW);
tft.setTextSize(1);
tft.setCursor(10, 70);
tft.println("• MQ-2 煙霧偵測");
tft.setCursor(10, 85);
tft.println("• MQ-135 空氣品質");
tft.setCursor(10, 100);
tft.println("• AHT20 溫濕度");
tft.setCursor(10, 115);
tft.println("• WiFi 天氣時間");

delay(3000);
}

void connectWiFi() {
tft.fillScreen(TFT_BLACK);
tft.setTextColor(TFT_WHITE);
tft.setTextSize(1);
tft.setCursor(10, 40);
tft.println("連接 WiFi...");

WiFi.begin(ssid, password);

int attempts = 0;
while (WiFi.status() != WL_CONNECTED && attempts < 20) {
delay(500);
Serial.print(".");
tft.print(".");
attempts++;
}

if (WiFi.status() == WL_CONNECTED) {
wifiConnected = true;
Serial.println("\nWiFi 連接成功");
Serial.printf("IP: %s\n", WiFi.localIP().toString().c_str());

tft.setCursor(10, 60);
tft.setTextColor(TFT_GREEN);
tft.println("WiFi 連接成功!");
tft.setCursor(10, 75);
tft.printf("IP: %s", WiFi.localIP().toString().c_str());

setRGBColor(0, 255, 0); // 成功綠色
} else {
wifiConnected = false;
Serial.println("\nWiFi 連接失敗");

tft.setCursor(10, 60);
tft.setTextColor(TFT_RED);
tft.println("WiFi 連接失敗");
tft.setCursor(10, 75);
tft.println("將以離線模式運行");

setRGBColor(255, 255, 0); // 警告黃色
}

delay(2000);
}

void syncNTPTime() {
if (!wifiConnected) return;

configTime(8 * 3600, 0, "pool.ntp.org", "time.nist.gov");

Serial.println("同步 NTP 時間...");

struct tm timeinfo;
if (getLocalTime(&timeinfo)) {
ntpSynced = true;
Serial.println("NTP 時間同步成功");
} else {
ntpSynced = false;
Serial.println("NTP 時間同步失敗");
}
}

void updateTimeDisplay() {
if (!ntpSynced) return;

struct tm timeinfo;
if (getLocalTime(&timeinfo)) {
char timeStr[10];
char dateStr[12];
strftime(timeStr, sizeof(timeStr), "%H:%M:%S", &timeinfo);
strftime(dateStr, sizeof(dateStr), "%Y-%m-%d", &timeinfo);

currentTime = String(timeStr);
currentDate = String(dateStr);
}
}

void updateWeather() {
if (!wifiConnected) return;

HTTPClient http;
String url = "http://api.openweathermap.org/data/2.5/weather?q=" +
String(city) + "&appid=" + String(weatherApiKey) + "&units=metric&lang=zh_tw";

http.begin(url);
int httpCode = http.GET();

if (httpCode == HTTP_CODE_OK) {
String payload = http.getString();

DynamicJsonDocument doc(1024);
deserializeJson(doc, payload);

weatherData.description = doc["weather"][0]["description"].as<String>();
weatherData.temp = doc["main"]["temp"];
weatherData.humidity = doc["main"]["humidity"];
weatherData.pressure = doc["main"]["pressure"];
weatherData.windSpeed = doc["wind"]["speed"];
weatherData.icon = doc["weather"][0]["icon"].as<String>();
weatherData.valid = true;

Serial.println("天氣更新成功");
} else {
Serial.printf("天氣更新失敗: %d\n", httpCode);
weatherData.valid = false;
}

http.end();
}

void updateSensorData() {
// 讀取 AHT20 溫濕度
if (aht20.isConnected()) {
sensorData.temperature = aht20.getTemperature();
sensorData.humidity = aht20.getHumidity();
}

// 讀取氣體感測器
sensorData.mq2_raw = analogRead(MQ2_PIN);
sensorData.mq135_raw = analogRead(MQ135_PIN);

// 轉換為 PPM (簡化演算法，實際需要校正)
sensorData.mq2_ppm = convertMQ2ToPPM(sensorData.mq2_raw);
sensorData.mq135_ppm = convertMQ135ToPPM(sensorData.mq135_raw,
sensorData.temperature,
sensorData.humidity);

// 計算空氣品質指數
calculateAirQualityIndex();

Serial.printf("溫度: %.1f°C, 濕度: %.1f%%, MQ2: %.1f ppm, MQ135: %.1f ppm\n",
sensorData.temperature, sensorData.humidity,
sensorData.mq2_ppm, sensorData.mq135_ppm);
}

float convertMQ2ToPPM(int rawValue) {
// MQ-2 轉換公式 (需要根據實際感測器校正)
float voltage = rawValue * (3.3 / 4095.0);
float rs = (3.3 - voltage) / voltage * 10.0; // 假設負載電阻 10kΩ
float ppm = 100 * pow(rs / 10.0, -1.4); // 簡化公式
return ppm;
}

float convertMQ135ToPPM(int rawValue, float temp, float hum) {
// MQ-135 轉換公式並進行溫濕度補償
float voltage = rawValue * (3.3 / 4095.0);
float rs = (3.3 - voltage) / voltage * 10.0;

// 溫濕度補償
float correctionFactor = 1.0 + 0.02 * (temp - 20.0) + 0.01 * (hum - 50.0);
float compensatedRs = rs / correctionFactor;

float ppm = 50 * pow(compensatedRs / 10.0, -1.2); // 簡化公式
return ppm;
}

void calculateAirQualityIndex() {
// 基於 MQ135 數值計算 AQI
if (sensorData.mq135_ppm <= 50) {
sensorData.airQualityIndex = map(sensorData.mq135_ppm, 0, 50, 0, 50);
sensorData.airQualityLevel = "優良";
} else if (sensorData.mq135_ppm <= 100) {
sensorData.airQualityIndex = map(sensorData.mq135_ppm, 51, 100, 51, 100);
sensorData.airQualityLevel = "良好";
} else if (sensorData.mq135_ppm <= 200) {
sensorData.airQualityIndex = map(sensorData.mq135_ppm, 101, 200, 101, 150);
sensorData.airQualityLevel = "輕度污染";
} else if (sensorData.mq135_ppm <= 300) {
sensorData.airQualityIndex = map(sensorData.mq135_ppm, 201, 300, 151, 200);
sensorData.airQualityLevel = "中度污染";
} else {
sensorData.airQualityIndex = 250;
sensorData.airQualityLevel = "重度污染";
}
}

void updateDisplay() {
switch (currentPage) {
case PAGE_OVERVIEW:
drawOverviewPage();
break;
case PAGE_AIR_DETAIL:
drawAirDetailPage();
break;
case PAGE_CLIMATE:
drawClimatePage();
break;
case PAGE_WEATHER:
drawWeatherPage();
break;
case PAGE_SYSTEM:
drawSystemPage();
break;
}
}

void drawOverviewPage() {
tft.fillScreen(TFT_BLACK);

// 頁面指示器
drawPageIndicator(0);

// 標題
tft.setTextColor(TFT_CYAN);
tft.setTextSize(1);
tft.setCursor(85, 5);
tft.println("空氣品質總覽");

// 空氣品質指數 (大字顯示)
uint16_t aqiColor = getAQIColor(sensorData.airQualityIndex);
tft.setTextColor(aqiColor);
tft.setTextSize(3);
tft.setCursor(90, 25);
tft.printf("%d", sensorData.airQualityIndex);

tft.setTextSize(1);
tft.setCursor(80, 55);
tft.setTextColor(aqiColor);
tft.println(sensorData.airQualityLevel);

// 空氣品質圖標
drawAirQualityIcon(20, 25, aqiColor);

// 感測器數據 (小字)
tft.setTextColor(TFT_WHITE);
tft.setTextSize(1);

// 溫濕度
tft.setCursor(10, 75);
tft.printf("溫度: %.1f°C", sensorData.temperature);
tft.setCursor(120, 75);
tft.printf("濕度: %.0f%%", sensorData.humidity);

// 氣體感測
tft.setCursor(10, 90);
tft.printf("煙霧: %.0f ppm", sensorData.mq2_ppm);
tft.setCursor(120, 90);
tft.printf("CO₂: %.0f ppm", sensorData.mq135_ppm);

// 時間
tft.setTextColor(TFT_YELLOW);
tft.setCursor(10, 110);
tft.printf("%s %s", currentTime.c_str(), currentDate.c_str());

// 操作提示
tft.setTextColor(TFT_GREEN);
tft.setCursor(150, 120);
tft.println("A:下頁 B:更新");
}

void drawAirDetailPage() {
tft.fillScreen(TFT_BLACK);
drawPageIndicator(1);

// 標題
tft.setTextColor(TFT_CYAN);
tft.setTextSize(1);
tft.setCursor(80, 5);
tft.println("空氣品質詳細");

// MQ-2 煙霧感測器
tft.setTextColor(TFT_ORANGE);
tft.setTextSize(1);
tft.setCursor(10, 25);
tft.println("MQ-2 煙霧偵測:");

tft.setTextColor(TFT_WHITE);
tft.setTextSize(2);
tft.setCursor(10, 40);
tft.printf("%.1f ppm", sensorData.mq2_ppm);

// 煙霧警示條
drawWarningBar(150, 40, sensorData.mq2_ppm, 0, 500);

// MQ-135 空氣品質感測器
tft.setTextColor(TFT_LIGHTGREEN);
tft.setTextSize(1);
tft.setCursor(10, 65);
tft.println("MQ-135 空氣品質:");

tft.setTextColor(TFT_WHITE);
tft.setTextSize(2);
tft.setCursor(10, 80);
tft.printf("%.1f ppm", sensorData.mq135_ppm);

// 空氣品質警示條
drawWarningBar(150, 80, sensorData.mq135_ppm, 0, 300);

// AQI 指數
uint16_t aqiColor = getAQIColor(sensorData.airQualityIndex);
tft.setTextColor(aqiColor);
tft.setTextSize(1);
tft.setCursor(10, 105);
tft.printf("AQI: %d (%s)", sensorData.airQualityIndex, sensorData.airQualityLevel.c_str());
}

void drawClimatePage() {
tft.fillScreen(TFT_BLACK);
drawPageIndicator(2);

// 標題
tft.setTextColor(TFT_CYAN);
tft.setTextSize(1);
tft.setCursor(85, 5);
tft.println("溫濕度監控");

// 溫度顯示
tft.setTextColor(TFT_RED);
tft.setTextSize(1);
tft.setCursor(20, 25);
tft.println("溫度:");

tft.setTextSize(3);
tft.setCursor(20, 40);
tft.printf("%.1f", sensorData.temperature);
tft.setTextSize(2);
tft.print("°C");

// 溫度圖標
drawTemperatureIcon(150, 35, TFT_RED);

// 濕度顯示
tft.setTextColor(TFT_BLUE);
tft.setTextSize(1);
tft.setCursor(20, 75);
tft.println("濕度:");

tft.setTextSize(3);
tft.setCursor(20, 90);
tft.printf("%.0f", sensorData.humidity);
tft.setTextSize(2);
tft.print("%");

// 濕度圖標
drawHumidityIcon(150, 85, TFT_BLUE);

// 舒適度指示
String comfort = getComfortLevel(sensorData.temperature, sensorData.humidity);
uint16_t comfortColor = getComfortColor(comfort);

tft.setTextColor(comfortColor);
tft.setTextSize(2);
tft.setCursor(60, 115);
tft.println(comfort);
}

void drawWeatherPage() {
tft.fillScreen(TFT_BLACK);
drawPageIndicator(3);

// 標題
tft.setTextColor(TFT_CYAN);
tft.setTextSize(1);
tft.setCursor(85, 5);
tft.println("天氣與時間");

if (!wifiConnected) {
tft.setTextColor(TFT_RED);
tft.setTextSize(2);
tft.setCursor(50, 60);
tft.println("無網路連線");
return;
}

// 時間顯示
tft.setTextColor(TFT_YELLOW);
tft.setTextSize(2);
tft.setCursor(40, 25);
tft.println(currentTime);

tft.setTextSize(1);
tft.setCursor(70, 45);
tft.println(currentDate);

if (weatherData.valid) {
// 天氣描述
tft.setTextColor(TFT_WHITE);
tft.setTextSize(1);
tft.setCursor(10, 65);
tft.printf("天氣: %s", weatherData.description.c_str());

// 氣溫
tft.setCursor(10, 80);
tft.printf("氣溫: %.1f°C", weatherData.temp);

// 濕度和氣壓
tft.setCursor(10, 95);
tft.printf("濕度: %d%% 氣壓: %.0f hPa", weatherData.humidity, weatherData.pressure);

// 風速
tft.setCursor(10, 110);
tft.printf("風速: %.1f m/s", weatherData.windSpeed);

// 天氣圖標
drawWeatherIcon(180, 65, weatherData.icon);
} else {
tft.setTextColor(TFT_ORANGE);
tft.setCursor(10, 70);
tft.println("天氣資料載入中...");
}
}

void drawSystemPage() {
tft.fillScreen(TFT_BLACK);
drawPageIndicator(4);

// 標題
tft.setTextColor(TFT_CYAN);
tft.setTextSize(1);
tft.setCursor(85, 5);
tft.println("系統狀態");

// WiFi 狀態
tft.setTextColor(wifiConnected ? TFT_GREEN : TFT_RED);
tft.setCursor(10, 25);
tft.printf("WiFi: %s", wifiConnected ? "已連線" : "未連線");

if (wifiConnected) {
tft.setTextColor(TFT_WHITE);
tft.setCursor(10, 40);
tft.printf("IP: %s", WiFi.localIP().toString().c_str());
tft.setCursor(10, 55);
tft.printf("RSSI: %d dBm", WiFi.RSSI());
}

// 時間同步狀態
tft.setTextColor(ntpSynced ? TFT_GREEN : TFT_RED);
tft.setCursor(10, 70);
tft.printf("時間同步: %s", ntpSynced ? "已同步" : "未同步");

// 感測器狀態
tft.setTextColor(TFT_WHITE);
tft.setCursor(10, 85);
tft.printf("AHT20: %s", aht20.isConnected() ? "正常" : "異常");

// 運行時間
tft.setCursor(10, 100);
unsigned long uptime = millis() / 1000;
tft.printf("運行時間: %lu 秒", uptime);

// 記憶體使用
tft.setCursor(10, 115);
tft.printf("可用記憶體: %d bytes", ESP.getFreeHeap());
}

// 繪圖函式
void drawPageIndicator(int currentPageIndex) {
// 頁面指示圓點
for (int i = 0; i < PAGE_COUNT; i++) {
uint16_t color = (i == currentPageIndex) ? TFT_CYAN : TFT_DARKGREY;
tft.fillCircle(10 + i * 15, 130, 3, color);
}
}

void drawAirQualityIcon(int x, int y, uint16_t color) {
// 簡單的空氣品質圖標 (雲朵形狀)
tft.fillCircle(x, y + 10, 8, color);
tft.fillCircle(x + 8, y + 10, 6, color);
tft.fillCircle(x + 15, y + 10, 8, color);
tft.fillRect(x - 8, y + 10, 23, 8, color);
}

void drawTemperatureIcon(int x, int y, uint16_t color) {
// 溫度計圖標
tft.drawCircle(x, y + 15, 4, color);
tft.drawRect(x - 2, y, 4, 15, color);
tft.fillCircle(x, y + 15, 2, color);
}

void drawHumidityIcon(int x, int y, uint16_t color) {
// 水滴圖標
tft.fillCircle(x, y + 10, 6, color);
tft.fillTriangle(x, y, x - 6, y + 10, x + 6, y + 10, color);
}

void drawWeatherIcon(int x, int y, String iconCode) {
// 根據天氣代碼繪製簡單圖標
if (iconCode.startsWith("01")) { // 晴天
tft.fillCircle(x, y, 8, TFT_YELLOW);
} else if (iconCode.startsWith("02") || iconCode.startsWith("03")) { // 多雲
tft.fillCircle(x - 5, y, 6, TFT_WHITE);
tft.fillCircle(x + 5, y, 6, TFT_LIGHTGREY);
} else if (iconCode.startsWith("04")) { // 陰天
tft.fillCircle(x, y, 8, TFT_DARKGREY);
} else if (iconCode.startsWith("09") || iconCode.startsWith("10")) { // 雨天
tft.fillCircle(x, y - 5, 6, TFT_DARKGREY);
for (int i = 0; i < 3; i++) {
tft.drawLine(x - 3 + i * 3, y + 3, x - 3 + i * 3, y + 10, TFT_BLUE);
}
}
}

void drawWarningBar(int x, int y, float value, float minVal, float maxVal) {
// 警示條
int barWidth = 60;
int barHeight = 8;

// 背景
tft.drawRect(x, y, barWidth, barHeight, TFT_WHITE);

// 填充條
float percentage = constrain(value / maxVal, 0, 1);
int fillWidth = barWidth * percentage;

uint16_t fillColor;
if (percentage < 0.3) fillColor = TFT_GREEN;
else if (percentage < 0.7) fillColor = TFT_YELLOW;
else fillColor = TFT_RED;

tft.fillRect(x + 1, y + 1, fillWidth - 2, barHeight - 2, fillColor);
}

// 輔助函式
uint16_t getAQIColor(int aqi) {
if (aqi <= 50) return TFT_GREEN;
else if (aqi <= 100) return TFT_YELLOW;
else if (aqi <= 150) return TFT_ORANGE;
else if (aqi <= 200) return TFT_RED;
else return TFT_PURPLE;
}

String getComfortLevel(float temp, float humidity) {
if (temp >= 20 && temp <= 26 && humidity >= 40 && humidity <= 60) {
return "舒適";
} else if (temp < 18) {
return "偏冷";
} else if (temp > 28) {
return "偏熱";
} else if (humidity < 30) {
return "乾燥";
} else if (humidity > 70) {
return "潮濕";
} else {
return "一般";
}
}

uint16_t getComfortColor(String comfort) {
if (comfort == "舒適") return TFT_GREEN;
else if (comfort == "一般") return TFT_YELLOW;
else return TFT_ORANGE;
}

void updateLEDAlert() {
// 根據最嚴重的警示等級設定 LED 顏色
bool highSmoke = sensorData.mq2_ppm > 200;
bool highAirPollution = sensorData.mq135_ppm > 150;
bool extremeTemp = sensorData.temperature < 10 || sensorData.temperature > 35;

if (highSmoke || highAirPollution || extremeTemp) {
// 緊急狀況 - 紅色閃爍
setRGBColor(255, 0, 0);
delay(100);
setRGBColor(0, 0, 0);
} else if (sensorData.airQualityIndex > 100) {
// 輕度污染 - 橙色
setRGBColor(255, 165, 0);
} else if (sensorData.airQualityIndex > 50) {
// 良好但需注意 - 黃色
setRGBColor(255, 255, 0);
} else {
// 空氣品質良好 - 綠色
setRGBColor(0, 255, 0);
}
}

void setRGBColor(uint8_t r, uint8_t g, uint8_t b) {
ledcWrite(RED_CH, 255 - r);
ledcWrite(GREEN_CH, 255 - g);
ledcWrite(BLUE_CH, 255 - b);
}

void buttonFeedback() {
setRGBColor(255, 255, 255);
delay(100);
updateLEDAlert();
}